1021WIRED	Marathon Motor 115v 60 HZ 1725 RPM 1/4 HP, 1/2" shaft prewired with switch and ready to go.	98.50
1022	Motor mount bracket with necessary hardware, fits above motors and numa 48 frame motors	5.00
1023	Mounting board 12" x 18" used for No. 1021 motor (motor mount bracket not included)	7.50
1024	Mounting board 8" x 24" used for No. 1021A motor (motor mount bracket not included)	7.50
1026	Depth stop for workpiece in chuck	4.00
1030	4 jaw 3 1/4" dia. chuck 3/4-16 thd mount jaws adjusted independently (reversable heat treated steel jaws	63.50
1034	Lathe Dog, holds work piece while turning between centers.	9.25
1035	Face plate 3 1/4" dia. 3/4-16 thd mount	14.30
1036	Face plate angle bracket set	5.60
1037	Face plate, 2" dia. 3/4-16 thd mount	7.80
1037-3H	Face plate, 3 holes, 2" dia. (wood turners)	10.15
1038	4 inch swivel joint tool rest (wood turners)	26.75
1040 *	Collet set, collet closer with 8 collet sizes 1/8,5/32,3/16,7/32,1/4,9/32,5/16 and one blank	29.85
1041A*	1/8 collet	4.15
1041B*	5/32 collet	4.15
1041C*	3/16 collet	4.15
1041D*	7/32 collet	4.15
1041E*	1/4 collet	4.15
1041F*	9/32 collet	4.15
1041G*	5/16 collet	4.15
1042*	Collet closer	5.40
1043*	4 blank collets furnished unslotted for making special arbors (may be bored and slotted)	2.90
1040ER	ER 16 Collet Set (1/16, 1/8, 3/16, 1/4, 5/16, 3/8)	$56.00
1041ER-A	1/16" ER 16 Collet	$9.50
1041ER-B	1/8" ER 16 Collet	$9.50
1041ER-C	3/16" ER 16 Collet	$9.50
1041ER-D	1/4" ER 16 Collet	$9.50
1041ER-E	5/16" ER 16 Collet	$9.50
1041ER-F	3/8" ER 16 Collet	$9.50
1041ER-G	3/32" ER 16 Collet	$9.50
1041ER-H	5/64" ER 16 Collet	$9.50
1041ER-I	5/32" ER 16 Collet	$9.50
1050*	3 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with reversable aluminum soft jaws 3/4-16 thd.	63.10
1050atla	3 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with reversable aluminum soft jaws 1"-8 thd.	70.00
1051	Additional blank soft jaw set for 3 jaw chuck	7.90
1052	Full circle soft jaw set for 3 jaw chuck	7.75
1060*	4 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with aluminum soft jaws 3/4-16 thd.	71.40
1060atla	4 Jaw 3 1/4" dia. self centering scroll chuck (steel body) with reversable aluminum soft jaws 1"-8 thd.	75.00
1090*	0-1/4" Jacobs drill chuck, industrial quality 3/8-24 thd.	36.25
1091*	0-1/4" Jacobs drill chuck, commercial quality 3/8-24 thd.	9.90
1092*	1/16-3/8" Jacobs drill chuck, commercial quality 3/8-24 thd.	10.20
1093*	1/8-1/2" Jacobs drill chuck, commercial quality 3/8-24 thd.	19.20
1095	6 piece high speed steel tool bit set, left,right,45 degree,round nose,boring bar, and cut off	27.60
1096	Unground tool bit 1/4" square	1.95
1097A	Left hand tool bit	5.05
1097B	Right hand tool bit	5.05
1097C	45 degree chamfer tool bit	5.05
1097D	Round nose tool bit	5.05
1097E	Boring bar tool bit	5.05
1097F	Cut off tool bit	5.50
1110*	Slitting saw arbor, screws directly on spindle including wrench	5.60
1110ER*	Slitting saw arbor with 3/8" shank used on ER16 spindle with 3/8" collet	5.60
1111*	.032 X 2 1/2": dia high speed slitting saw	12.00
1120	Grinding wheel arbor, screws directly on spindle	6.20
1122	Grinding wheel set	7.00
1130	Blank arbor 1.00" dia. screws directly on spindle (may be machined for special jobs)	3.90
1132	Blank arbor	2.60
>1140	Drill chuck arbor (3/8-24 thread) for regular spindle. Attaches Jacobs chucks to headstock spindle	10.90
>1140ER*	Drill chuck arbor (3/8-24 thread) with 3/8" shank, attaches Jacobs chucks to ER headstock spindle using a 3/8" ER16 collet	10.90
1150	Drilling tailstock, lever operated 5/8" off set with dead center, 3/8-24 thd for drill chucks	38.20
1151	Needle bearing center, spring loaded (fits in tailstock)	15.80
1152	Die holder for tailstock (will accept 13/16" and 1.00" button dies)	15.90
1159*	Spare Gates polyurethane vee belt(est. belt life 5000 hours) No.3M 315 12 1/2" flat length	7.90 *
1160	Spare Gates polyurethane vee belt(est. belt life 5000 hours) No.3M 500 20" flat length	7.90
1161	6 step pulley set (2 pulleys per set) 3/8" motor shaft 3M 500 belt included	24.45
1162	Pulley set as above for 1/2" shaft motor STD 3M 315 belt included (3M 500 belt optional)	24.45
1170	Extra tool post (same as supplied with lathe)	4.60
1171	Back tool post, tool bit mounts upside down, 2 tools may be used at same time	4.95
1173	T Bar Cut off Tool, height adjustable (available 12/15/00)	27.90
1190	Steady rest 3/32" to 1 1/2" capacity	24.80
1200	Top slide (compound) mounts on crosslide for cutting tapers and angles	44.60
1210	Radius Turner, swings Tool Bit in arc	19.85
1220	Milling attachment mounts directly on crosslide (2 x 3 3/4" table)	61.70
1221	3/4-16 chuck adapter, adapts chuck to mill table	14.45
1224*	Fly Cutter, 1 1/4 to 2 1/2 inch diameter, 3/4-16 thread mount, Left hand tool bit included.	19.50
1224ER*	Fly Cutter, 1 1/4 to 2 1/2 inch diameter with 3/8" shank used on ER16 spindle Left hand tool bit included.	19.50
1225	Milling vice, 2.125" opening x 2" wide	26.75
2225*	Milling vice with handcrank, 2.125" opening x 2" wide	31.75
1230*	5 PIECE END MILL SET (DOUBLE SIDED) 1/16,3/32,1/8,5/32,3/16 *RETAIL $57.50*	$50.00
1230A*	1/16 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet	11.50
1230B*	3/32 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet	11.50
1230C*	1/8 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet	11.50
1230D*	5/32 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet	11.50
1230E*	3/6 dia. milling cutter, 2 flute double end 3/16 shank, mounts in 3/16 collet	11.50
1250*	Riser block kit for headstock and tool post (provides 6.00 swing tailstock riser not incl)	24.50
1251	Tailstock riser only	19.75
1300	Book - "How to Run a Lathe"	8.25
1305	Book - "The TAIG Lathe" By Tony Jeffree 180 pages on the TAIG Lathe,accessories,and projects	22.95
1310*	1" SPINDLE WRENCH	7.50
2010*	4" x 14" x 5/8" Tooling plate for Mill. Bolts down to either 2018 mill table or 2019 mill table. Plate has 56 10-32 holes that are 1" on center spaced	60.00
2228*	1/4" shank Edge Finder for use on the Mill	12.00