Internet Special

The Internet Special for this month is the TAIG Micro Mill and all its specifications below (8.5 inch travel in 'X' instead of the normal 9.5). The special includes 2 ER16 Collets (1/4 & 3/8), a Vise, 2 End mills (1/8 & 3/16 inch) and the power switch and cord as shown. All of this is available for the price of $750.00 with free shipping.

Note: This special does not apply to dealers.

Micro Mill With Vise (way-covers included but not shown)

GENERAL

Height 21-3/8 in Width 17 in Depth 16-3/4 in Weight 65 lbs Maximum bearing runout 0.0004 in. Table dimensions 3 1/2 by 14 1/2 inches X axis dovetails 45 deg. Y axis dovetails 90 deg. Z axis steel box ways 1/2"-20 leadscrews on X,Y,& Z All lead screw drives have friction adjustable micrometer dials in .001 inch increments Pulley type std. 5/8 in. bore multi-step vee belt. Construction - Steel, hard anodized aluminum on all moving components, adjustable brass gibs, and precision ground steel ways hand lapped for long life and accuracy.

CAPACITY

Travel in Y axis 5.5 in Travel in X axis 8.5 in Travel in Z axis 6.0 in Maximum Z-distance to table 9.0 in Z-Axis swivel 90 degrees 6 spindle speeds 525-5200 RPM Z axis column rotation up to 180 degrees Spindle head rotation 90 degrees

SPINDLE (ER16 SPINDLE)

Spindle Runout less than .0003 Max spindle speed 5000 RPM Sealed precision ball bearing Bearing OD 1.5748 in., ID 0.6692 in. Spindle nose 22mm X 1.5mm Spindle hole 0.406 in.

Spindle ID taper 8 deg (16 deg included) Max. collet diameter 3/8 in. Pulley size 5/8 in. bore. Ball Bearings in all leadscrew bearing blocks